Piadina and food safety training consists of programmes in which a team learns, in practice, how to prepare the product, run hygienic production and service, and meet food law requirements. Effective training does not end with a presentation: it has clear goals, exercises at the workstation, a knowledge check and documentation proving that employees have been trained. Below we describe which trainings are needed in catering and piadina production, how to plan them, how to assess their effectiveness and what to look for when choosing a provider. This page contains no price list or calendar of dates: we adjust scope, duration and format to your enquiry.
Why training is required, not just recommended
Regulation (EC) No 852/2004 requires that people working with food are supervised and instructed or trained in food hygiene matters appropriate to their work. Those responsible for developing and maintaining HACCP-based procedures must have adequate knowledge. In addition there are occupational health and safety rules imposing initial and periodic training (the Labour Code and implementing regulations), and the duty to provide allergen information arising from Regulation (EU) No 1169/2011.
In practice, training is therefore not only good practice but an element of the food safety system that is checked by the sanitary inspector and verified by the auditor of a certification scheme. During an inspection the usual questions are who was trained, when and in what scope, how knowledge was verified and how the results were recorded.
What inspectors and auditors say
- Training must be adequate to the position: a person baking, a cashier and a manager need different content.
- Training must be documented: attendance list, programme, trainer, date, test or observation result.
- Training must be repeated periodically and after changes (new menu, new equipment, an incident, a procedure change).
- Employees should be able to demonstrate knowledge in practice, not just point to a certificate.
- Supervisors' knowledge matters more than paper: if a manager does not know the procedures, staff will not follow them.
Training catalogue for piadina: who needs what
The catalogue below shows typical training topics and audiences. We adapt programmes to company size, risk and the team's experience. We set the number of hours individually after a conversation, which is why it is not given in the table.
| Training | Audience | Main topics | Outcome |
|---|---|---|---|
| Hygiene basics and GHP for employees | restaurant and food truck staff, production workers | personal hygiene, handwashing, clothing, illness and reporting, contamination, pests, cleaning and disinfection | the employee applies hygiene rules and can explain them |
| HACCP for management and owners | owners, managers, people responsible for quality | 7 principles, hazard analysis, CCPs, monitoring, corrective actions, documentation | the team can maintain and update the HACCP plan |
| Allergens and informing customers | all service staff, kitchen, front of house | 14 allergens, matrix, cross-contamination, customer communication, labels | the employee answers customer questions according to procedure |
| Piadina technology: dough and baking (workshop) | cooks, bakers, new production staff | flour, fat, salt, water, resting, rolling, baking, correcting defects | repeatable product quality in line with the standard |
| Food truck: hygiene, service and formalities | crews of trucks and event stands | register entry, temperatures, water and waste, inspection, working at peak times | a crew ready to work in the field and for inspection |
| Piadina production: GMP, shelf life, label | production plants, technologists | process parameters, post-bake zone, packing, shelf-life studies, labels | the production team applies the parameters and understands their purpose |
| Internal auditor of the food safety system | people responsible for internal audits | audit planning, techniques, report, nonconformities, corrective actions | the team conducts effective internal audits |
| Traceability and product recall | quality, logistics, purchasing, production | batch records, mock recall, crisis communication | the plant can identify a batch and its recipients quickly |
| Preparing for official inspection and customer audit | all staff responsible for contact with inspectors | how an inspection runs, how to talk, what to show, how to respond to remarks | a calm and professional inspection |
| Training for network franchisees | franchisees, outlet managers | manual, HACCP template, audits, indicators, team management | standards unified across the whole network |
Training for different stages of a company
- Before launch. Before you open a restaurant, truck or plant you need the basics of hygiene, HACCP and allergens, and knowledge of formalities. Here training is part of the implementation.
- During growth. As the team grows, so do turnover and the risk of errors. It is worth introducing a permanent onboarding programme for new people and periodic refreshers.
- Before certification or a customer audit. Internal audit training and audit preparation let the team understand the requirements and avoid nonconformities.
- After an incident. A complaint, a poisoning, an inspection with remarks: training is part of corrective action and proof that the causes have been eliminated.
Training formats: classroom, online, on site, workshop
The best format depends on the topic, group size and whether employees must practise on equipment. Theoretical knowledge can be delivered remotely, but practical skills (baking, cleaning, working at the workstation) require exercises in real conditions.
| Format | Advantages | Limitations | When to choose |
|---|---|---|---|
| In-house training at your site | content matched to your product, exercises on your own equipment, the whole team in one place | requires organising employees' time and a room | HACCP implementation, new equipment, new team |
| Open classroom training | exchange of experience with other participants, no need to organise a room | less tailored to your specifics, date is fixed | individuals, short general topics |
| Live online training | saves travel, people from several locations can join | limited practical exercises, a good connection is required | theory, regulatory updates, training for networks |
| E-learning materials (self-paced) | available any time, repeatable, good for staff turnover | less interaction, harder to check understanding | onboarding new employees, refreshers |
| Practical workshop at the workstation | real skills: baking, portion standard, cleaning, defect correction | smaller group, equipment and raw materials needed | piadina technology, griddle operation, food truck |
| Consulting and mentoring | individual implementation support, quick response to problems | takes the trainer's time | managers, owners, quality |
In practice a mixed model works best: a short theoretical part (online or classroom), followed by a workshop at the workstation and verification at work after a few weeks. A one-off training rarely changes habits; repetition, feedback and supervision by the manager do.
Model programmes: modules and goals
Below are sample programmes. They are frameworks that we adapt to the company. We set the duration of each module depending on the group and the level of knowledge.
Programme 1: hygiene and GHP for employees (basic level)
- Why hygiene mattersConsequences of food poisoning, legal liability, brand image. The employee understands that their behaviour matters.
- Microorganisms and hazard transferBasics on bacteria, viruses and moulds; transmission routes; cross-contamination.
- Personal hygieneHandwashing (when and how), clothing, jewellery, gloves, reporting illnesses and wounds.
- Cleaning and disinfectionThe difference between cleaning and disinfection, agents, concentrations, contact time, cleaning schedule.
- Temperature and timeThe danger zone, storage, cooling, serving.
- Pests and wasteRecognising signs, reporting, waste management rules.
- PracticeA handwashing demonstration (e.g. with a control preparation), a surface disinfection exercise, a final test.
Programme 2: allergens in catering and production
- Allergy versus intoleranceDifferences, symptoms and consequences; why a small amount can be dangerous.
- Fourteen allergen groupsThe list arising from the regulations and their presence in piadina and typical fillings.
- Allergen matrixHow to read, update and use it at work; what to do when a supplier changes a composition.
- Preventing cross-contaminationSeparating tools, production order, cleaning, gloves, storage.
- Customer communicationHow to answer questions, when to step back and consult the manager, how to document enquiries.
- EmergenciesWhat to do when a customer reports symptoms of an allergic reaction; emergency numbers, first aid, incident reporting.
- Exercises"Customer question" scenarios and label verification in groups.
Programme 3: piadina technology workshop
- Raw materials and their effect on the resultFlour, fat, salt, raising agent, water: the parameters that affect quality.
- Recipe in baker's percentagesConverting, scaling, introducing changes, keeping a trial sheet.
- Dough: mixing, resting, dividingDough temperature, mixing time, portion weight control.
- Rolling and bakingThickness, diameter, griddle temperature, time, turning, blisters, colour.
- Defects and their causesCracking, rubberiness, raw centre, scorching, metallic aftertaste: diagnosis and correction.
- Sensory evaluationAn evaluation card (1–5 scale), calibrating scores within the team.
- PracticeEach participant makes a series of flatbreads, and the trainer assesses and corrects technique.
Programme 4: HACCP for management
- Structure of the food safety systemPrerequisite programmes (GHP/GMP), HACCP plan, documentation, responsibilities.
- HACCP team and product descriptionWho should take part, how to describe the product and its intended use.
- Process flow and hazard analysisBiological, chemical and physical hazards, allergens; assessing significance.
- CCPs and OPRPsDetermining control points, critical limits, monitoring, corrective actions.
- Verification and validationInternal audits, tests, system review.
- Documentation and recordsHow to keep them so that they are credible and useful.
- Case studyDeveloping a fragment of a HACCP plan for packaged piadina or for a food truck, depending on the group.
Programme 5: official inspection and customer audit
- Who inspects and howThe State Sanitary Inspection, the Veterinary Inspection, customer auditors and certification bodies.
- Rights and duties of the inspected partyPresenting documents, accompanying the inspector, the protocol, objections.
- Typical nonconformitiesCleaning and disinfection, temperature records, allergens, training, traceability.
- Inspection simulationA practical exercise on site with questions and document verification.
- Post-inspection action planHow to respond to remarks and implement corrections.
How to assess training effectiveness
The most common mistake companies make is considering training finished when participants have signed the attendance list. Effectiveness is measured by changes in behaviour at work and by results. A popular evaluation model developed by Donald Kirkpatrick distinguishes four levels and suits catering training well.
| Level | What we assess | How to measure it |
|---|---|---|
| 1. Reaction | whether participants found the training useful and clear | a short survey after the training, a conversation with the group |
| 2. Knowledge and skills | whether participants learned what was planned | a test before and after, a practical exercise, a demonstration |
| 3. Behaviour | whether employees changed the way they work after the training | observation at the workstation after a few weeks, a checklist, an internal audit |
| 4. Results | whether business and quality indicators changed | number of complaints, audit nonconformities, raw material losses, swab results, customer ratings |
Sample indicators after training
- The number of nonconformities regarding hand hygiene or temperature records in subsequent internal audits.
- The correctness of employees' answers to "mystery customer" allergen questions.
- The number of complaints about the appearance and taste of piadina (scorching, raw centre).
- The change in the share of raw material losses and product rejects.
- Results of swabs from food contact surfaces.
- The time to bring a new employee to independent work.
It is important to set indicators before the training and to measure them at least once afterwards. Without a baseline you do not know whether a change is the effect of training or chance. In small companies a simple sheet with a few measures, filled in once a month, is enough.
Training documentation: what to record and how long to keep it
The regulations do not impose a single template for hygiene training documentation, but inspectors and auditors expect the company to prove who was trained, when and in what scope. Below is a minimum set of documents.
- Training programme with goals, topics, format, duration and trainer.
- Attendance list with names, positions, date and signatures.
- Training materials in the version valid on the day of training (presentation, instructions).
- Knowledge check result (test, exercise, observation) and the trainer's assessment.
- Certificate or confirmation of completion, if provided.
- Training register, a summary kept for each employee, with dates of the next training.
- Effectiveness assessment (levels 2–4) recorded briefly with conclusions.
Set the retention period in the company on the basis of customer requirements, certification schemes and rules on employee records; in practice a period of at least several years is often used. OHS training documentation is subject to separate labour law provisions, so check them with an OHS specialist or the HR department.
Training register: sample layout
| Employee / position | Topic | Date | Trainer | Format | Result | Next training |
|---|---|---|---|---|---|---|
| name, position | e.g. hygiene and GHP | date | person or company | in-house / online / workshop | passed / to repeat | planned date |
How to choose a training provider
The food safety training market is broad. Quality varies considerably, and a certificate of attendance proves nothing by itself. Ask the questions below before you sign an order.
- The trainer's practical experience. Do they have audit or implementation experience in the bakery, catering or production sector, rather than only theoretical knowledge?
- Programme fit. Is the programme prepared for your site, or is it a standard presentation?
- Practice. Does the programme include exercises, case studies and knowledge checks?
- Currency. Do the materials reflect current regulations (e.g. EU regulations, national guidelines) and standards?
- Documentation. Will you receive the programme, lists, test results and conclusions from the effectiveness assessment?
- Support after training. Can you consult doubts after the training ends?
- References. Can the provider point to customers from a similar sector who will confirm the quality of the work?
- Transparency. Are scope, duration, price, liability and protection of participants' data clearly described in the offer?
Who the trainer is
Training at Quality Assurance Poland is delivered by Michał Cierpiałowski, a lead auditor and consultant in food safety systems and certification, trained as a food technologist (master's degree, Università degli Studi di Udine). He combines the technologist's perspective with the auditor's, so the training answers the questions asked during real inspections and audits. You will find more information on the author page.
Materials and exercises that work in practice
Below we show excerpts from typical training materials. You can use them as inspiration for your own workstation instructions and short pre-shift briefings. They do not replace a full programme, but they illustrate the way of working: concrete language, short steps, a check of understanding.
Handwashing: workstation instruction (template)
- Remove jewellery from hands and wrists. Turn on warm water.
- Wet your hands and apply soap.
- Wash thoroughly the palms, backs of hands, spaces between fingers, thumbs and fingertips, for the time given in the instruction (usually from over ten to several dozen seconds).
- Rinse hands under running water.
- Dry hands with a disposable towel and turn off the tap using the same towel.
- If the procedure requires it, disinfect hands with a hand sanitiser.
When to wash hands: before starting work, after using the toilet, after contact with raw meat, eggs, waste, money and a phone, after sneezing, coughing and touching the face, after a break and before putting on gloves.
Sample test questions: hygiene
- When must you wash your hands? Give three situations.
- What is the difference between cleaning and disinfection, and why is disinfecting a dirty surface not effective?
- What will you do if you have diarrhoea or a fever in the morning?
- Why do disposable gloves not replace handwashing?
- What is cross-contamination? Give an example from your workstation.
- What will you do if the thermometer in the fridge shows a temperature above the limit?
Sample questions and scenarios: allergens
- A customer asks whether a piadina with a vegetarian filling contains nuts. You do not know. What do you do?
- A supplier has changed the pesto to another one. Where will you check the composition and what will you do with the allergen card?
- An employee used the same knife to cut cheese and ham. Why might this be a problem for a person allergic to milk?
- A guest says they are allergic to sesame. How will you react and whom will you inform?
- Name at least five of the fourteen allergen groups and indicate in which menu items they may occur.
Exercise: diagnosing piadina defects
Participants receive several piadina samples with different defects (deliberately prepared) and a diagnostic card. Their task is to recognise the defect, identify a possible cause and propose a correction.
| Symptom | Possible causes | Suggested correction |
|---|---|---|
| The piadina cracks when folded | too little water or fat, flatbread too thin, baked too long, drying out after baking | check the recipe, thickness and baking time; cover after baking |
| The piadina is rubbery, tough | mixed too long, flour too strong, dough not rested | shorten mixing, verify the flour, extend resting |
| Raw centre with scorched edges | griddle temperature too high, flatbread too thick | lower the temperature, reduce thickness, extend time |
| Metallic, bitter aftertaste | excess bicarbonate or baking powder | check dosing, use a scale with suitable resolution |
| No blisters and no colour | griddle temperature too low, excess water | check griddle heating, reduce the amount of water |
| Irregular shape, uneven thickness | uneven rolling or dividing | calibrate the roller, rolling training, dough ball weight control |
| Rancid smell | used or poorly stored fat | check the date and storage conditions, replace the fat |
Exercise: simulating a customer allergen enquiry
In pairs, participants play the roles of customer and employee. The customer asks questions (for example about sesame, nuts, milk, gluten). The employee answers on the basis of the allergen matrix, and an observer assesses: was the answer clear, did the employee admit a lack of knowledge if they had none, and did they inform their supervisor. The exercise is repeated with harder scenarios (supplier change, special product, customer in a hurry).
Annual training plan: how to organise the programme
One-off trainings have a limited effect. Planning on an annual scale lets you organise needs, repeat key topics and respond to changes. The table below shows a plan framework; adjust the dates and duration to your seasonality.
| Period | Topic | Group | Format |
|---|---|---|---|
| Before the season | hygiene refresher, allergens, seasonal menu, handling the peak | whole team | in-house workshop |
| Onboarding new employees | hygiene, OHS, allergens, product standards | new employees | onboarding programme, e-learning, mentor supervision |
| During the year | internal audits, complaint analysis, short topics of the week | management, team | short briefings, discussions |
| After changes | new equipment, new recipe, new supplier, procedure change | people affected by the change | instruction, workshop |
| Before an audit or inspection | audit preparation, inspection simulation | management and key positions | training and simulation |
| End of the year | training review, effectiveness assessment, plan for the next year | management, quality | review meeting |
Short pre-shift briefings
Besides formal training, five-minute briefings before work starts work very well. The manager chooses one topic of the week (for example "hand hygiene after touching a phone", "an ingredient changed in a sauce", "what to do when a customer asks about nuts"), shows an example, asks a question and records attendance. Over a year such a practice builds a food safety culture more than one long training.
Hazards a participant should know about
Good training does not limit itself to commands ("wash your hands"), but explains why. Below is a technical summary that we use in the hazard modules. It shows how knowledge from microbiology translates into working rules in catering and piadina production.
| Hazard | Where it occurs | Why it matters | Working rule |
|---|---|---|---|
| Salmonella | eggs, raw poultry, cross-contaminated products | a frequent cause of food poisoning; destroyed at high temperature | heat treatment to the right temperature, separating raw and ready-to-eat products |
| Listeria monocytogenes | ready-to-eat products, cold cuts, soft cheeses, the plant environment | can grow at refrigeration temperatures; dangerous especially for pregnant women, the elderly and immunocompromised people | hygiene and cleaning, short storage time, temperature control, environmental swabs in production |
| Staphylococcus aureus | skin, nose, wounds, staff hands | produces toxins not destroyed by heating; the source is usually a person | hand hygiene, covering wounds, keeping sick people away from work, limiting time at room temperature |
| Bacillus cereus | cereals, starch, flour and rice products | forms spores resistant to heat treatment; in the danger zone it grows and may produce toxins | fast cooling, not holding in a warm place, time and temperature control |
| Noroviruses | sick people and carriers, contaminated water and food | highly contagious; easily spread via hands and surfaces | excluding sick people from work for the period given in procedures, handwashing, surface disinfection |
| Moulds | baked goods, flour, post-bake surfaces | spoil packaged product, some produce mycotoxins | post-bake zone hygiene, fast cooling, tight packing, date control |
The temperature danger zone
Good hygiene practice speaks of a zone in which microorganisms grow fastest: from fridge temperature to food reheating temperature. The rules are easy to remember, although the exact limit values must be set in the plant's HACCP system: perishable products are stored chilled (usually up to about 4–5 °C), hot dishes are kept above about 63 °C, and the time a product spends between these limits is kept to a minimum. Participants should be able to say what to do when the time has been exceeded: who decides and how the product is handled.
Chemical and physical contamination
- Cleaning and disinfecting agents. Storage away from food, labelled containers, use in line with the safety data sheet, rinsing after use.
- Physical contamination. Pieces of packaging, glass, metal, hair, jewellery parts. Training covers rules for wearing head covering, checking the condition of equipment and what to do in case of breakage or loss of a part.
- Allergens as a chemical hazard. In food safety systems allergens are treated as a separate hazard category: they require separate procedures because even a small amount can cause a reaction.
OHS in catering and piadina production
OHS training is a separate employer duty arising from the Labour Code: initial training before an employee is allowed to work and periodic training at the intervals set in the regulations. It is delivered by a person who meets the regulatory requirements (usually an OHS specialist). Food safety and OHS trainings are nevertheless worth coordinating, because many hazards overlap.
| Hazard | Where it occurs | Protective measure |
|---|---|---|
| Burns | griddle, grill, oven, hot fat, steam | suitable gloves and tools, clear movement rules, markings on hot surfaces, a first aid kit with burn supplies |
| Cuts | knives, slicers, rollers, dividers | machine guards, operating training, sharpening and storing tools in designated places |
| Slips and falls | wet or greasy floors, cables, steps in a vehicle | non-slip footwear and floors, prompt cleaning of spills, tidiness at workstations |
| Gas and fire | gas installations, fat, electrical equipment | detectors, extinguishers, inspections, a procedure, a ban on using damaged installations |
| Electric shock | electrical equipment, wet environment | working installations, residual-current protection, cable checks |
| Flour dust | sifting and dosing flour | ventilation, limiting dust, respiratory protection on a larger scale |
| Physical strain | lifting sacks, long standing, repetitive movements | handling aids, breaks, ergonomic workstations |
First aid
Every catering team should have people trained in first aid and an accessible, complete first aid kit. For piadina the most important are burns (cooling with cold water for a suitably long time, protecting the wound, calling for help in the case of extensive injuries), cuts (stopping the bleeding, dressing, changing gloves, securing the product) and customers' allergic reactions (recognising symptoms, calling the emergency number, telling the services about the probable allergen). The procedure is best practised, not only read.
Training for a piadina plant: GMP in practice
In a production plant training is different from that in a restaurant: employees operate machines, work in zones with different hygiene requirements and take part in checking process parameters. The programme combines hygiene, technology and documentation, and works best when it is partly held on the line.
Training modules for production
| Module | Content | Check |
|---|---|---|
| Zones and flow of people and materials | raw material zone, production zone, post-bake zone, traffic control, changing clothes when moving between zones, rules for visitors | observation on the line, control questions |
| Process parameters and records | water and dough temperature, mixing time, portion weight, baking temperature and time, seal integrity; who measures, how often and what to do after a deviation | exercise on measurement sheets, deviation simulation |
| Post-bake hygiene | cooling, touching the product, tools, cleaning belts, the effect of mould spores on shelf life | test with examples, behaviour observation |
| Cleaning and disinfection | cleaning schedules, concentrations, contact time, dismantling machines, visual inspection and swabs | demonstration, control swab after cleaning |
| Foreign body control | metal detector test, handling rejects, glass and jewellery policy | detector alarm simulation |
| Allergens in production | production schedule, cleaning after allergens, rework, label verification | scenarios, label check |
| Traceability | batch numbers, records, mock recall | batch search exercise |
The role of the shift manager
The shift manager is the most important person in maintaining the system: they see deviations first, decide on stopping the line and are responsible for records. That is why we prepare a separate programme for this group: understanding CCPs and OPRPs, making decisions about nonconforming product, communicating with the quality department, running short briefings and responding to incidents. We practise situations in which a decision must be made quickly and documented in a way an auditor can understand.
Internal auditor: how to prepare people for audits
Internal audits are one of the tools that distinguish a living system from documentation in a binder. For them to work, the auditor should be a person with suitable knowledge, independent of the audited area and well trained in interviewing technique and writing findings. The training programme for internal auditors covers:
- The role of audit in the systemGoals of internal audit, the difference between an audit and an inspection, principles of impartiality and confidentiality.
- Requirements of the audited systemHACCP, GHP/GMP, scheme requirements (e.g. ISO 22000, IFS, BRCGS) or a customer's; how to read a standard and turn requirements into questions.
- Audit planningScope, criteria, schedule, checklist, sample selection, preparing documents.
- Conducting the auditTalking to employees, observation, collecting evidence, asking open questions, dealing with resistance.
- Findings and reportFormulating nonconformities (description, requirement, evidence), classification, recommendations, report-writing rules.
- Corrective actionsRoot cause analysis, action plan, deadline, effectiveness verification.
- Practical exerciseParticipants conduct a short audit at the plant or in a simulated environment and prepare a report for discussion.
Example of a nonconformity statement
A good statement is specific and contains no judgement of the person. Example: "In the baking area on the audit day no griddle temperature records were found for the first shift (requirement: process sheet, point 4, measurement every hour). Evidence: a measurement sheet dated on the audit day, no entries between the start and end of the shift." Such a record allows the process to be improved without pointing to a culprit.
What working with us on training looks like
- Short briefYou describe the company (restaurant, truck, plant, network), the number of people, topics, expected outcome and constraints (dates, shifts, language). You can send the brief through the form.
- Needs diagnosisIf needed we will ask for documents (menu, HACCP plan, audit results) or arrange a short call to understand the context.
- Programme proposal and quotationWe send a training plan with goals, modules, format, duration and effectiveness assessment rules, and a quotation.
- TrainingWe deliver it according to the agreed programme, with practical exercises and a knowledge test.
- Documentation and conclusionsAfter the training you receive the programme, attendance list, test results and a short report with recommendations.
- Post-training supportWe answer questions arising in practice and, if needed, plan a verification of effects after a few weeks.
Participant data and confidentiality
For training we process participants' personal data (name, position, test results) to the extent necessary to conduct and document the training. The rules of processing are described in the privacy policy. We treat information about your company, recipes and processes as confidential; confidentiality rules can be specified in a contract or a separate clause.
The most common mistakes in employee training
- Training "for the paperwork". An attendance list without content and without a knowledge check. At the inspector's first question it turns out nobody remembers the rules.
- One programme for everyone. A cashier, a cook and a manager need different content.
- No practice. Baking, handwashing and disinfection must be practised, not talked about.
- No follow-up. After the training nobody checks whether the rules are applied.
- Training that is too long in one block. Attention drops after a few dozen minutes; it is better to combine shorter parts with breaks and exercises.
- No training for managers. Employees do what they see their supervisors do.
- Forgotten changes. A new supplier, new equipment or a recipe change do not trigger training that would change behaviour.
- No translations. Do you employ people who speak little Polish? Provide materials in a language they understand and check understanding in practice.
Summary: what to take from this page
- Hygiene training is an element required by food law; what counts is proof that it was adequate and effective.
- Combine theory with practice: exercises at the workstation matter more than a long presentation.
- Adapt the programme to the position, the product (piadina, food truck, production, network) and the level of the team.
- Document: programme, lists, results, training register, effectiveness assessment.
- Measure effects with indicators before and after training, not only with a satisfaction survey.
- Repeat training periodically and after changes; short briefings reinforce habits.
Want to prepare a programme for your team? Describe your company and the goal of the training and we will reply with a proposal. Useful background before training is on the Piadina, Production and Food truck and catering pages.
One-day workshop scenario: piadina from the basics to the first sale
For future owners of restaurants, food trucks and small workshops we propose a workshop that combines piadina technology with knowledge of food safety. Below is the outline of the day; we set exact hours, the number of participants and the venue individually, because they depend on the available equipment and the level of the group.
| Block | Content | Format |
|---|---|---|
| 1. Introduction | what piadina is, the PGI specification versus a product in Poland, the market and business models | lecture with discussion |
| 2. Raw materials | flour, fat, salt, raising agent; comparing samples, effect on the result | demonstration and tasting |
| 3. Dough | recipe in baker's percentages, mixing, resting, dividing | group workshop |
| 4. Rolling and baking | thickness, diameter, griddle temperature, time, colour; quality control | individual exercises |
| 5. Fillings and menu | flavour combinations, portion standard, portion cost, allergens | costing exercise |
| 6. Hygiene and HACCP in brief | hygiene rules, temperatures, cleaning, control points in a small restaurant or truck | lecture with exercise |
| 7. Formalities | registering food business activity, allergen information, labels for a packaged product | discussion and questions |
| 8. Summary | knowledge test, implementation plan for the coming weeks, materials for self-study | test, discussion |
What a participant should be able to do after the workshop
- Explain what piadina is, how it differs from tortilla and lavash, and describe its basic composition.
- Prepare dough according to a recipe in baker's percentages and correct it when flour or conditions change.
- Bake a piadina of even thickness and colour and assess it using a sensory card.
- Calculate the portion cost and set a price, taking into account losses and packaging.
- Prepare allergen information for their menu.
- Identify key control points in a small restaurant or truck and describe how to record them.
- List the formalities needed to start a business and know which offices to turn to for confirmation.
Competence map: who in the team should be able to do what
So that training is not random, it is worth preparing a competence matrix: a table in which for each position you define the required skills and the current level. It lets you see gaps, plan training and show an auditor that you know who can do what.
| Competence | Baking | Service and till | Manager | Quality / technologist |
|---|---|---|---|---|
| Hygiene and GHP | 2 | 2 | 3 | 3 |
| Allergens and communication | 2 | 3 | 3 | 3 |
| Piadina technology and baking | 3 | 1 | 2 | 3 |
| Records and HACCP | 1 | 1 | 3 | 3 |
| Equipment operation and OHS | 3 | 1 | 2 | 2 |
| Customer service and complaints | 1 | 3 | 3 | 2 |
| Internal audit | 0 | 0 | 1 | 3 |
The values in the table are illustrative, serve to show the template and are meant to be replaced with an assessment of real people. Once the matrix is filled in you can see where the gaps are (for example nobody can conduct an internal audit, and the team has only one person who knows baking technology). On this basis you plan training, cover for absences and recruitment.
Cleaning validation and effectiveness checks: an advanced topic
Cleaning and disinfection are the basis of safety and at the same time one of the most often badly performed processes. In production plants training covers not only how to clean, but also how to check that cleaning is effective. Three levels of control are used.
- Visual inspection. Checking surface cleanliness before work starts, using a checklist, with a responsible person and a record.
- Rapid tests. Swabs for organic residues (e.g. ATP tests) or allergen tests; the result is available quickly and allows cleaning to be corrected immediately.
- Microbiological testing. Swabs and contact plates from food contact surfaces, taken in a laboratory according to a plan, with trend evaluation over time.
Participants learn how to take a swab, how to interpret results and what to do when limits are exceeded. It is important that the monitoring plan arises from a risk assessment (the post-bake zone matters more than the flour store) and that results are analysed, not just archived.
Training for institutional catering and catering services
Institutional catering facilities (schools, nurseries, hospitals, care homes) serve particularly vulnerable groups: children, the elderly, the sick. In these places the requirements for staff are higher: careful hygiene, rigorous allergen management, temperature safety and precise records. Training for this group additionally covers:
- rules on feeding children and young people in educational institutions and recommendations on meal composition;
- special diets (gluten-free, dairy-free, vegetarian) and procedures for preparing them without cross-contamination;
- transport and temperature maintenance of meals delivered to facilities;
- taking and storing meal samples in line with applicable guidelines;
- cooperation with a dietitian and the facility's management.
Piadina in institutional catering requires adjusting the composition (salt, fat, type of flour) and simple reheating instructions. We write about this in more detail in the article Piadina in institutional catering.
Training and certification: what the schemes expect
Food safety certification schemes (ISO 22000, FSSC 22000, IFS Food, BRCGS Food Safety) in different ways but always require the organisation to determine the necessary competence of people affecting product safety, to provide training or other actions and to evaluate their effectiveness. The auditor usually checks several things: whether competence requirements exist for positions, whether employees were trained before starting work, whether training is repeated, whether there is evidence of effectiveness assessment and whether the team knows its role in the system.
| Auditor's question | Evidence |
|---|---|
| How were the competences required for positions determined? | job descriptions, competence matrix |
| How are new people trained before working with food? | onboarding programme, register, skills card |
| How do you know the training was effective? | tests, observations, indicators, audit conclusions |
| Do employees understand their CCPs and OPRPs? | conversation at the workstation, monitoring records |
| How are temporary and agency staff trained? | induction procedure, records, supervision |
| Does management take part in training and reviews? | attendance lists, review minutes |
| What do you do after an incident? | report, corrective actions, follow-up training |
Temporary, seasonal and external people
Seasonal food truck crews, agency workers, trainees and service contractors (maintenance, cleaning) are often the weak link. Introduce a rule that none of these people starts work in the food area without a short induction on hygiene, allergens and illness reporting rules, confirmed by a signature. For visitors to the plant prepare a one-page instruction and entry rules.
Choosing the group, language and date
- Group size. Practical workshops work best in small groups in which the trainer sees each participant's work. The theoretical part can be run for a larger audience.
- Language. If the team includes people who speak little Polish, provide graphic materials, pictograms and short instructions in a language the employees understand. Check understanding at the workstation, not only by a signature on a list.
- Date. Plan training outside peak sales and production. In catering, mornings before opening or quieter days work well, and in production, breaks between shifts.
- Venue. For cleaning, baking and production exercises you need access to water, a griddle and tools; for theory a room with a projector is enough. If training takes place in a truck, plan a place where it will not disturb neighbours.
- Absent people. Plan catch-up training for people who could not attend, because absence does not remove the requirement.
Questions we ask at the start
- What product do you make or sell and on what scale?
- How many people are to be trained and in which positions do they work?
- What documents do you have: HACCP plan, procedures, instructions, results of recent inspections?
- Have there been incidents, complaints, remarks from inspectors or auditors?
- Is an audit, an inspection or the opening of a new outlet approaching?
- Which training format is most convenient for you and where can it take place?
- Do you need materials in other languages?
The answers help prepare a programme that fills gaps rather than repeating what the team already knows. For companies just starting out we propose beginning with a short consultation and diagnosis, and only then choosing the scope of training.
Frequently asked questions (FAQ)
Is hygiene training mandatory for catering staff?
Regulation (EC) No 852/2004 requires that people working with food are supervised and instructed or trained in hygiene appropriate to their work. The rules do not impose a single template or duration, but the company must be able to show who was trained and when.
Does HACCP training end with a certificate?
Usually the participant receives a certificate of completion. The law does not require a single official HACCP certificate for employees, so what counts is the programme, documentation and the check of knowledge, not the name of the document.
How often should hygiene and allergen training be repeated?
The rules give no single frequency for hygiene training. In practice training is repeated periodically, e.g. once a year, and after changes (new menu, equipment, procedure, an incident). Set the frequency in the HACCP system on the basis of risk and staff turnover.
Can training be conducted online?
Theory (regulations, hygiene rules, allergens) can be delivered online. Practical skills such as baking, cleaning or working at the workstation require exercises in real conditions, so it is best to combine formats. OHS training has separate requirements as to how it is delivered.
Can training take place at my plant or food truck?
Yes, this is a common format. Training at the workplace lets you practise on your own equipment and match the content to the menu, vehicle and procedures. It requires organising the team's time.
How much does training cost and how long does it take?
We do not give a price list or fixed durations, because they depend on the topic, number of people, format and venue. We prepare a quotation after a short description of your needs, and adapt the programme to the group.
How do I check whether training had an effect?
Set indicators before training (e.g. audit nonconformities, complaints, answers to allergen questions, losses), and measure them again afterwards. Add a knowledge test right after the training and observation of work after a few weeks.
Who delivers training at QAP?
Training is delivered by Michał Cierpiałowski, a lead auditor and consultant in food safety systems, trained as a food technologist. The programme combines the technologist's perspective with the auditor's.
Sources and references
- Regulation (EC) No 852/2004 on the hygiene of foodstuffs (Annex II, Chapter XII: training), EUR-Lex
- Regulation (EU) No 1169/2011 on the provision of food information to consumers, EUR-Lex
- Commission Notice relating to the provision of information on substances or products causing allergies or intolerances (2017/C 428/01), EUR-Lex
- Labour Code: provisions on occupational health and safety training (Article 237³), ISAP (in Polish)
- State Sanitary Inspection: information for businesses (gov.pl, in Polish)
- Kirkpatrick Partners: The Kirkpatrick Model
Content checked against public sources: October 10, 2026. Laws and specifications change, so before making legal decisions check the current wording of the acts or ask the competent authority.